physics lab equipment

Diode Laser Diffraction: This Experiment setup is used to study the diffraction phenomenon of light which can be observed when a laser beam passes through a diffraction slit. The intensity pattern can be determined using a pin photo detector with fine movement across the diffraction pattern.






Electrical Conductivity Of Metal: The electrical conductivity of a metal (Copper & Aluminum) is determined by the resistance R of the rod and its geometric dimensions (l=0.315 m, A = 4.91 x10-4 m2).

Field Lines & Equipotential Lines: This Experiment setup is used to study the diffraction phenomenon of light which can be observed when a laser beam passes through a diffraction slit. The intensity pattern can be determined using a pin photo detector with fine movement across the diffraction pattern. In the present setup, the light intensity in the terms of current or voltage is noted at closed intervals by finely traversing the detector movement and observing the light intensity on a digital multimeter.



For more info on physics lab equipment please visit Acumen Labware.

Physics Lab

These are the new range of physics lab equipment developed by us.

BH Curve Loop/ Magnetic Hysteresis Loop Tracer: In this experiment when a cylindrical sample is placed coaxially in a periodically varying magnetic field the magnetization in the sample also undergoes periodic variation.

Balmer Series And Rydberg Constant: In this experiment set-up a discharge lamp is used to emit hydrogen atoms which form a series of lines in the visible part of the spectrum.



Dielectric ConstantThe main objective of this experiment is to verify the relation between capacitance C, charge Q and charging voltage E which is given as C=Q/E. The capacitance of a parallel plate capacitor depends upon the distance d between the plates, area A of the plates and the nonconductive material (having dielectric constant) between the plates.

Do visit again for latest updates.

Electrical Electronics Trainers

The reputation attained as Electrical Electronics Trainer manufacturers has been a long journey. It is not a days work that qualifies you as the best Electrical Electronics Trainer kits manufacturer globally. The teamwork which goes behind creating this platform and up lifting it to this level has been mind blowing. Tremendous effort has gone down the line in attaining this level of proficiency which we have achieved to day as Electrical & Electronics Training kits manufacturer. 

Working of a lab hot air oven

Today we shall talk about the working of a lab hot air oven  which is done by using the forced circulation of hot air inside the chamber of oven. As it is a proven scientific theory that in any given enclosure the hot air rises above the cold air, So by utilising this principle when the hot air reaches the top of chamber it is circulated back to bottom by a fan installed inside the chamber and hence optimum amount of heat is achieved gradually inside the hot air oven.

The sterilisation cycle of the oven for two hours at a temperature of 180 Degree Celsius, the articles are allowed to remain inside the chamber, till the temperature drops down to 40 Degree Celsius. Then the articles are considered sterilised and are taken out of the oven.

The principle of operation of a hot air oven is based on the theory of air convection inside an electrically heated chamber. The double wall design of the Oven body and a digital p.i.d temperature control and display unit ensure a constant temperature profile in the chamber, precise operation of predetermined processes and short recovery time (return to the preset temperature) after door opening. This range of  ovens is highly economical in operation and easy to use. It is suitable for simple process of drying and heating of common materials. The units work noiseless.

Power Electronics Equipment

The branch of electronics which deals in equipment integrated by switching circuits used to control both alternating and direct currents is known as power electronics. This vertical of electronics and electrical engineering is directly associated with research, design and implementation of non liner, time-varying, energy-processing electronic systems. The discrete components used in power electronics with semiconductor switching devices can be classified as diodes, transistors and thyristors (Silicon Controlled Rectifier (SCR), Gate Turn-Off Thyristors, Insulated Gate Bipolar Transistors (IGBT), Gate-Commutated Thyristors).

Electrical Engineering Training Kits

With the introduction of new range of electronics and electrical engineering training kits we have once again reclaimed our position as the global leader in training kits manufacturing. With the introduction of these new training equipment it seems like a breadth of fresh air has been induced in the technical education space. With a promulgated objective of consistent improvement we keep on introducing and redesigning our electronics and electrical engineering training kits making it more unfriendly and more interactive.

INSTALLATION & LOCATION SELECTION tips for HOT AIR OVEN

•    HOT AIR OVEN shall be located to protect them from damage by external heat, vibration and mechanical hazards.
•    Ovens shall be located to minimize exposure to power equipment, process equipment and sprinkler risers. Unrelated stock and combustible materials shall be maintained at a fire-safe distance but not less than 10 feet from an oven or ductwork.
•    Furnace shall be located to minimize exposure to people from the possibility of injury from fire, explosion, asphyxiation, and hazardous materials and shall not obstruct personnel travel to exit ways.
•    Ovens shall be located to prevent an ignition source to flammable coating dip tanks, spray booths, storage and mixing rooms for flammable liquids, or exposure to flammable vapor or combustible dust clouds. Furnace should not be located in hazardous locations.